Table Adhesive
Product Code: HTAH165 & HTAH5L
Table Adhesive is pressure sensitive glue, applied to the board under your print area to hold the item still whilst printing and stop lifting.
Holding the item still eliminates movement which causes smudges, blurring and misprints, plus is also critical when printing multiple colours.
This product should used every time you screen print a t-shirts, bag or fabric, etc. - that's why it's included in every NEHOC package!
Available Sizes
 |
165ml Convenient pack |
 |
5 Litre Bulk pack for trade use and wholesalers |
- Product Home
- Specifications
- Accessories
- Support
Key Features
Pressure sensitive adhesion - lasts longer than spray adhesives
Water based - excess washes out of t-shirts - unlike solvent sprays
Long lasting - a little goes a long way saving you $$
Usage
On initial application apply 1 DROP per 5cm and spread using card/ paper - allow to soak in and dry before use.
Re-application use 1 drop per 10cm in design area only.
If too much Table Adhesive is applied, allow excess to touch dry before use, or wipe excess with a lint free cloth to absorb and then air dry for 10 minutes before use.
Further usage details available in:
N8525 Screen Correction Manual
Cleaning
Clean lid/seal before closing to prevent sticking.
Store away from heat.
Contents
Each.
Specifications
HTAH165 - 165ml
Item Weight [Kg]: 0.185
Pack Length: 56mm
Pack Width: 56mm
Pack Height: 85mm
Cbm: 0.066 Kg
HTAH5L - 5 Litre
Item Weight [Kg]: 5.25
Pack Length: 180mm
Pack Width: 135mm
Pack Height: 285mm
Cbm: 1.731 Kg
Price and Availability
All prices are online in NEHOCdirect - select the 'Just Looking' option in Step 2.
 Single Colour Wooden T-Shirt JigSPJ-SK |
 Single Colour Metal JigSPJ-M1 |
 4 Arm Wooden T-Shirt JigSPJ-4SK |
 4 Arm Metal Jig - Pin RegistrationSPJ-M4 |
 4 Arm Metal Jig with Bearing Hub & RegistrationSPJ-M4B |
Ask a Question
Complete the Product Assistance Form for a quick reply to any question not answered in the FAQ's or training section - click here . . Select the product code listed at the top of this page.
FAQ's
Can I use anthing else other than adhesive to hold the fabric down?
In short, no using table adhesive is pretty much the only way to hold the fabric in place as you have to hold the design area still.
clamps/ clipping/ taping/ etc. holds the edges down but not the middle.
Page Information:
Level: Beginner to Advanced
< Previous: S-028 Colour Mixing Wheel - Pocket Size and S-029 Colour Mixing Wheel - Large Artist Size
> Next: S-181 Adhesive Boards for Cloth
Products: HTAH165 Table Adhesive
Last modified: 2 August, 2011