EZIscreen Basic Fabric Kit
Product Code: EZI-BASIC
An easy to use starter kit allows you to begin printing fabrics quickly with StencilPro™ Standard film.
Unlike Speedball and Diazo emulsions, there is no coating screens before you begin - simply start exposing your designs instantly.
With EZIscreen you can keep and reuse your screens - no destroying them to make a new design!
Yes that's right, you don't have to destroy your designs and reclaim the screens each time you would like a new design, with the EZIscreen can remove your StencilPro™ film once you have finished printing, store the screen for later use and reuse your frame for a new design.
- Reusing your frames saves you $$ each time you make a screen and importantly you don't have to remake a design when you want to reuse it, simply pull is back out, attach to your frame and start printing again whenever you want.
Our Basic Kit comes with 2 x Standard StencilPro™ sheets, Inkjet Artwork Transparency sheets, both large and small plastic frames, beginners squeegee, 3 x standard fabric inks, timer, washout brush, ink palette knife, instructions and our printing lesson with a free white T-shirt to get you started instantly.
Plus your receive the EZIscreen Opaque Storage Container to washout your StencilPro™ films during developing and also store all your equipment in after use!
Specifications |
| Click icon below for details . . |
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Previous product: EZIScreen Trial Pack
Next product: EZIscreen Basic High Resolution Kit
- Usage
- Technical
- Support/ FAQ's
Key Features
Low cost startup to print fabrics and T-shirts using standard inks
Print A5 and A4 straight away, print A3 simply by adding larger items
No extra exposure equipment - use sunlight or inside under a fluroescent lamp
No coating emulsions - no mixing sensitizer, emulsions or chemicals then waiting to dry
Develop in water with fast exposure times (under 1 min. in sunlight)
EZIscreen printing lesson for standard fabric inks included with white t-shirt
Usage
See individual products for details.
For best results when exposing StencilPro™ film, we recommend using the Magnetic Exposure Frame (not included), to hold the transparency tight against the film.
Cleaning
See individual product pages for further details.
Storage
See individual product pages for further details.
Contents
StencilPro screeen equipment:
2 x StencilPro™ Standard Sheets (218x279mm/ 8.5x11")
2 x EZIscreen Inkjet Transparency Sheets
1 x Opaque Storage Container
1 x EZIscreen Digital Timer
1 x EZIscreen Washout Brush
Frame mounts:
2 x Small Plastic Frame (120 x 180mm)
1 x Large Plastic Frame (180 x 250mm)
Squeegee:
1 x 150mm Budget Plastic Squeegee
Printing accessories:
1 x Palette Knife
Inks:
3 x 150ml Standard Fabric Ink - Lemon Yellow, Mid Red and Mid Blue
Support, training and information:
Printing Lesson #1 for Standard Fabric Inks with white t-shirt
EZIscreen Usage Guide
StencilPro™ Usage Guide
Specifications
Supplied: Pack
Item Weight: 1.6Kg
Length: 340mm
Width: 270mm
Height: 85mm
Notice
CAUTION - StencilPro™ IS A LIGHT SENSITIVE MATERIAL
Open protective black bag under subdued lighting conditions only. Do not expose undeveloped film to U.V. or direct sunlight at any time. Avoid exposure to bright artificial light sources, especially from fluroescent tubes as this will begin to expose the StencilPro™ film. Protect from excessive heat, freezing and high humidity.
StencilPro™ film should be stored in an Opaque Storage Container away from heat and light sources.
Ask a Question
Complete the Product Assistance Form for a quick reply to any question not answered in the FAQ's or training section - click here . .
Important:
Use the product code listed at the top of this page.
FAQ's
There are no FAQ's for this product.
