EZIscreen Ceramic Printing Starter Kit
Product Code: EZI-CERAMIC
Stencil, print or transfer onto ceramics, glass, decals, clay and much more using the EZIscreen Cermaic Starter Kit.
Just add your ink for ceramics, decals or glass and you have available multiple printing options for direct printing onto bisque ware and off contact printing onto non-absorbent materials (glass/ glazes).
Faster, easier and cheaper!
With EZIscreen there is no coating emulsions onto your screens (i.e. Speedball and Diazo) simply start exposing your designs instantly under sunlight = faster, easier and cheaper.
Keep your screens, store them for later use and save on materials.
With EZIscreen you can keep and reuse your screens - no destroying them to make a new design!
Yes that's right, you don't have to destroy your designs and reclaim the screens each time you would like a new design, with the EZIscreen can remove your StencilPro™ film once you have finished printing, store the screen for later use and reuse your frame for a new design.
- Reusing your frames saves you $$ each time you make a screen and importantly you don't have to remake a design when you want to reuse it, simply pull is back out, attach to your frame and start printing again whenever you want.
The Ceramic Starter Kit contains:
Standard StencilPro™ sheets with A4 multi-function artwork transparencies
Magnetic exposure frame for sharper results and faster imaging
Small and large plastic frames for A5 and A4 printing - upgrade to larger sizes quickly
Specifications |
| Click icon below for details . . |
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Previous product: EZIscreen Complete Fabric Printing Kit
Next product: EZIscreen Single Colour Package
- Usage
- Contents/ Technical
- Support/ FAQ's
Key Features
Add your own inks/ oxides to print clay, decals, greenware, bisque or glazes items
Print A5 and A4 straight away, print A3 simply by adding larger items
Magnetic Exposure Frame provides sharper imaging results
Upgrade to Professional 'Long Life' Squeegee for sharper printing results
'Off contact' printing items included for onglaze printing
No extra exposure equipment - use sunlight or inside under a fluroescent lamp.
No coating emulsions - no mixing sensitizer, emulsions or chemicals then waiting to dry
Develop in water with fast exposure times (under 1 min in sunlight)
Usage
Off Contact printing technique
See individual products for details.
Cleaning
See individual product pages for further details.
Storage
See individual product pages for further details.
Contents
StencilPro screen equipment:
2 x StencilPro™ Standard Sheets (218x279mm/ 8.5x11")
5 x A4 Multi-function Artwork Transparencies
1 x EZIscreen Magnetic Exposure Frame
1 x EZIscreen Opaque Storage Container
1 x EZIscreen Digital Timer
1 x EZIscreen Washout Brush
1 x EZIscreen Plastic Canvas Washout Screen
2 x A5 Small Plastic Frame (120 x 180mm)
1 x A4 Large Plastic Frame (180 x 250mm)
Squeegee:
1 x 150mm Plastic Squeegee
Printing accessories:
1 x Screen Masking Tape (24mm)
5 x Plastic Height Adjusters (for off contact printing)
Support, training and information:
IS07: Ceramic Printing Technique
IS25: Screen Printing Technique
IS48: EZIscreen Usage Guide
StencilPro™ Usage Guide
Specifications
Supplied: Pack
Item Weight: 1.8Kg
Length: 340mm
Width: 275mm
Height: 120mm
Notice
StencilPro™ is a light sensitive material.
Open protective black bag under subdued lighting conditions only. Do not expose undeveloped film to U.V. or direct sunlight at any time. Avoid exposure to bright artificial light sources, especially from fluroescent tubes as this will begin to expose the StencilPro™ film. Protect from excessive heat, freezing and high humidity.
StencilPro™ film should be stored in an Opaque Storage Container away from heat and light sources.
Ask a Question
Complete the Product Assistance Form for a quick reply to any question not answered in the FAQ's or training section - click here . .
Important:
Use the product code listed at the top of this page.
FAQ's
There are no FAQ's for this product.
){kind=link}